SP Racing F3 Flight Controller (Acro) Now In Stock


SP Racing F3 Flight Controller (Acro) Now In Stock

Currently unavailable

Notify on availability
£39.50

 

The SPRacingF3 gives you all the features you need for the heart of your aircraft, whether you're into FPV racing, acrobatic flying or aerial photography it's perfect.

FEATURES

 

  • No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
  • On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork. (Acro and Deluxe)
  • Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core.
  • Stackable design - perfect for integrating with OSDs and power distribution boards.
  • 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
  • Full support for OneShot ESCs for easy PID tuning and a sharper response.
  • Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
  • Dedicated output for programmable LEDs - great for orientation, racing and night flying.
  • Dedicated I2C port for connection of OLED display without needing flight battery.
  • Battery monitoring ports for voltage and current.
  • Sonar support for precision low-altitude hold.
  • Buzzer port for audible warnings and notifications.
  • Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.
  • Symmetrical design for a super tidy wiring.
  • Wire up using using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
  • Barometer mounted on the bottom of the board for easy wind isolation.
  • Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
  • Configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
  • Supports a variety of aircraft, tricopters, quadcopters, hexacopters, octocopters, planes and more.

CLEANFLIGHT

 

The SPRacingF3 runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users.  Being open-source means that you too can contribute to the system.

Cleanflight comes with a detailed manual that is reviewed and maintained by the Cleanflight developers and community. No more out-of-date wiki pages and second-hand information.

The hardware was designed by the lead developer of Cleanflight, Dominic
Clifton, to be more capable than the STM32F1-based boards after hearing feedback from the Cleanflight users, contributors and top-pilots.

SPECIFICATIONS

 

  • 36x36mm board with 30.5mm mounting holes.
  •  ~5 grams.
  • STM32F3 CPU.
  • High-Capacity Flash (Acro and Deluxe)
  • MPU6050 accelerometer/gyro
  • MS5611 barometer (Deluxe only)
  • HMC5883 compass (Deluxe only)
  • MicroUSB socket.
  • 4x 4pin JST-SH sockets (I2C, SWD, 2xUART)
  • 2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
  • 8x 3pin though-holes for pin headers for ESC/Servo connections.
  • 2x 4pin though-holes for pin headers for 2x serial ports.
  • 2x 2pin though-holes for pin headers for battery voltage and buzzer.

 

Customers who bought this product also bought

TBS ZEROZERO
£44.99

Browse this category: Flight Controls